HIKVISION iDS-2CD9396-AIS User Manual

Network Traffic Camera • User Manual
62
 Motor vehicle, Non-motor vehicle, and Pedestrian: It captures motor vehicle, and non-motor
vehicle, and pedestrian.
 Motor Vehicle: Only motor vehicle will be captured.
Select Capture Mode. The capture mode is associated with the connected type of flashlight.
Strobe and Burst are selectable.
 Strobe: It adopts the frame extracting, and the captured pictures share the same exposure
parameters with the video image.
 Burst: It adopts the separate exposure.

A reboot is required when two modes switch.

If you set the capture mode as Burst, the capture image shares the same parameters with
the video image.

The Section 12.5 Configuring Picture is not supported when you select Strobe as the
capture mode.
Select Speed Detect Mode. N/A, Radar, and Video are selectable. N/A refers to disable the
speed detection.
Configure Mixed-Traffic Lane
Mixed-Traffic Lane Configuration
Select Total Lanes from the drop-down list. Up to 2 lanes can be selected.
Click the lane tab to select the lane to configure.
Select Lane Direction.

HIKVISION iDS-2CD9396-AIS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-AIS
Category	Security Camera
Language	English