Network Traffic Camera • User Manual
7
Chapter 1 Network Connection
You shall acknowledge that the use of the product with Internet access might be under
network security risks. For avoidance of any network attacks and information leakage,
please strengthen your own protection. If the product does not work properly, please
contact with your dealer or the nearest service center.
To ensure the network security of the camera, we recommend you to have the camera
assessed and maintained termly. You can contact us if you need such service.
Purpose:
To view and configure the camera via a LAN, you need to connect the camera in the same subnet
with your computer, and install the SADP to search and change the IP address of the camera.
Wiring over the LAN
The following figures show the two ways of cable connection of a camera and a computer.
Purpose:
To test the camera, you can directly connect the camera to the computer with a network
cable.
Set camera over the LAN via a switch or a router.
To Next Page
Loading...
Need help?
General
