HIKVISION iDS-TCM403-B/0832 User Manual

Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload images which are full of black or white pixel points. Enable Output Binary
Image in BMP Format if you want to output images in this format.
Mixed Target Upload Protocol
Uploads images of mulple targets such as humans and vehicles. You can enable the body
property to recognize clothes, bags, and other properes.
5.
Oponal: If you want to save the alarm informaon and pictures to the cloud storage, click to
set Cloud Storage. Refer to Set Cloud Storage for details.
6.
Click Save.
4.1.4 Set Arm Host
The device can upload the captured pictures via the arm host.
Steps
Note
For level 1 arm, the pictures can be uploaded normally. If uploading failed, the device will upload
again. For level 2 arm, the pictures will be uploaded once. No more upload if uploading failed. For
level 3 arm, pictures will not be uploaded.
1.
Go to Conguraon → Network → Data Connecon → Upload Arm .
Figure 4-4 Set Arm Host
2.
Select Protocol Type.
Note
Supported funcons vary with dierent models. The actual device prevails.
License Plate Upload Protocol
Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload binary images full of black or white pixel points. Enable Output Binary Image
in BMP Format if you want to output images in this format.
Network Trac Camera Operaon Manual
16

HIKVISION iDS-TCM403-B/0832 Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-B/0832
Category	Security Camera
Language	English