HIKVISION iDS-TCM403-B/0832 User Manual

5.3 Set ICR
ICR adopts mechanical IR lter to lter IR in the day to guarantee the image eect, and to remove
the IR lter at night to guarantee full-spectrum rays can get through the device.
Steps
1.
Go to Conguraon → Capture → Capture Images → ICR .
2.
Select ICR Mode.
Auto Switch Switches to ICR mode automacally at night or in dark light condions.
Manual Switch Select Day-night Mode to switch to the day or night manually.
Schedule Switch Set Day-night Mode, Start Time, and End Time to switch to ICR mode only
during the set me period.
3.
Click Save.
5.4 Set ROI
ROI (Region of Interest) encoding helps to assign more encoding resources to the region of
interest, thus to increase the quality of the ROI whereas the background
informaon is less
focused.
Before You Start
Please check the video encoding type. ROI is supported when the video encoding type is H.264 or
H.265.
Steps
1.
Go to
Conguraon → Video → Video Encoding → ROI .
Figure 5-2 Set ROI
2.
Select Stream Type.
3.
Set ROI region.
Network Trac Camera Operaon Manual
25

HIKVISION iDS-TCM403-B/0832 Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-B/0832
Category	Security Camera
Language	English