HIKVISION Network Audio/Video Encoder User Manual

User Manual of DS-6700 Series Audio/Video Encoder
15
2.3 Alarm Connections
2.3.1 Alarm Input Connections
DS-6700 supports the open/close relay input as the alarm input mode. For the alarm input signal not in open/close
relay signal mode, please follow the connections shown as below:
Alarm input connections for Emerson Alarm:
Encoder
Note: The relay input port of the Encoder should be set to NC mode.
Figure 2.9 Alarm Input Connections for Emerson Alarm
Alarm input connections for Normal Alarm:
Encoder
Figure 2.10 Alarm Input Connections for Normal Alarm
2.3.2 Alarm Output Connections
DS-6700 supports the open/close relay input as the alarm output mode. The alarm input can be selected to NO or
NC. Different alarm output connection methods are applied to the AC or DC load. Please refer to the following
diagram:
Alarm output connections diagram:
Figure 2.11 Alarm Output Connections

HIKVISION Network Audio/Video Encoder Specifications

General

Brand	HIKVISION
Model	Network Audio/Video Encoder
Category	Media Converter
Language	English