HIKVISION Network Audio/Video Encoder User Manual

User Manual of DS-6700 Series Audio/Video Encoder
41
Figure 7.16 Email Settings (2)
4. Click Save to save the Email settings.
Please refer to the following sections for more information:
Configure alarm linking methods with Send Email on Section 8.4.1 Configuring Motion Detection, Section 8.4.2
Configuring External Alarm Input, Section 8.4.3 Configuring Video Loss Alarm, Section 8.4.4 Configuring
Tamper-proof Alarm and Section 8.4.5 Handling Exception.
7.3.6 Adding Network Disk
For DS-6700HWI/HFI models, you must configure the network disk before operating the recording, playback or
log searching. For other models with SATA disks connected, the configuration of network disk is selectable.
Before you start:
1. The network storage device is available within the network and is properly connected.
2. The network storage device is configured with NAS or IP SAN mode (please refer to the User Manual of IP
SAN/NAS).
Steps:
1. Click Remote Configuration > Network Settings >NetHDD to enter the NetHDD settings interface.

HIKVISION Network Audio/Video Encoder Specifications

General

Brand	HIKVISION
Model	Network Audio/Video Encoder
Category	Media Converter
Language	English