3 Product Description CPU 03
Page 10 of 38 HI 800 479 E Rev. 1.00
3 Product Description
The CPU 03 module is the central component of the HIMatrix F60 controller.
The module can only be inserted in the slot located on the right, next to the power supply
module of the HIMatrix F60 subrack. It is used to store the operating system and the user
program, and executes all central functions, including communication with the PADT and
other systems. It monitors the operating voltage and operating temperature.
The configuration is carried out with the programming tool SILworX, see Chapter
4.4.
The module is suitable for sequence of events recording (SOE), see Chapter
4.3. The
device supports multitasking and reload. For more details, refer to the System Manual for
Modular Systems (HI 800 191 E).
i
A licence is required to use the events recording, the multitasking and the reload features.
The module has been certified by the TÜV for safety-related applications up to SIL 3
(IEC 61508, IEC 61511 and IEC 62061) and PL e (EN ISO 13849-1). Further safety
standards, application standards and test standards are specified in the certificate available
on the HIMA website.
Module's faults are signaled by the ERR LED located on the front plate, see Chapter
3.4.3.
3.1 Safety Function
The CPU monitors the sequence and the proper, logical execution of the operating system
and user program. The following functions are time monitored:
CPU hardware and software self-tests
CPU RUN cycle (including the user program)
I/O tests and processing of I/O signals
For further information on the fault reaction of the processor module, refer to Chapter
6.1.
To Next Page
Loading...
Need help?
General
