Installation RS20/22/30/32/40
Release
05
12/2015
19
1 Description
You can choose from between a wide range of variants. You have the option
to set up your device individually based on different criteria:
Number of ports
Transmission speed
Media type
Types of connectors
Temperature range
Certifications
Software variant
The RS20/22/30/32/40 devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility.
The devices allow you to set up switched industrial Ethernet networks that
conform to the IEEE 802.3 standard.
The devices work without a fan.
The voltage is supplied redundantly.
The following installation options are available:
simply snapping them onto a DIN rail
mounting them on a wall (only RS22/RS32)
Depending on the device variant, you can choose various media to connect
terminal devices and other infrastructure components:
twisted pair cable
multimode F/O
singlemode F/O
The twisted pair ports support:
Autocrossing
Autonegotiation
Autopolarity
There are convenient options for managing the device. Administer your
devices via:
a Web browser
Telnet
SSH
HiDiscovery (Software for putting the device into operation)
network management software (e.g. Industrial HiVision)
a V.24 interface (locally on the device)
The ring redundancy concept allows the network to be reconfigured quickly
after a failure.
To Next Page
Loading...
Need help?
General
