Hirschmann RS20 series User Manual

62
Installation RS20/22/30/32/40
Release 05 12/2015
6 Disassembly
6.1 Removing the device
Proceed as follows:
 Disconnect the data cables.
 Disable the supply voltage.
 Disconnect the terminal blocks.
 Disconnect the grounding.
 Insert a screwdriver horizontally below the housing into the locking gate.
 Without tilting the screwdriver, pull the locking gate down and tilt the
device upwards.
WARNING
ELECTRIC SHOCK
Disconnect the grounding only after disconnecting all other cables.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
RS20/RS30/RS40 RS22/RS32

Hirschmann RS20 series Specifications

General

Brand	Hirschmann
Model	RS20 series
Category	Switch
Language	English