Hisense HS216F User Manual

13
Basic Operation
Standby/ON
When you rst connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
Auto-Standby / Auto-Wake Feature
• [Auto-Standby] Your sound bar has been
programmed to enter Standby mode
automatically when no audio is detected for
15 minutes. For example, this would happen
when pausing playback, or should the sound
bar be left on accidentally.
• [Auto-Wake] If a TV or an external device is
connected (COAXIAL/OPTICAL socket), the
unit will switch on automatically when the TV
or the external device is switched on.
To disable this feature, please follow the steps
below:
1. Ensure the sound bar is in Power-ON state.
2. Pointing the remote at the soundbar, press
and hold the button to open the menu.
Press the button 6 times in succession, the
display shows: [AutoWake ON] / [AutoWake
OFF] / [AutoStandby ON] / [AutoStandby
OFF].
3. Select the content with VOL +/- button on
the remote controller, and then press
to conrm your selection and the exit the
settings.
• Repeating these steps will toggle the feature
ON and OFF.
Select Modes
Press the (SOURCE) button repeatedly on the
unit or on the remote control to select the
OPTICAL, COAXIAL, HDMI eARC, HDMI IN,
Bluetooth and USB mode. The selected mode
will show on the display.
Adjust the Bass/Treble Level
• Press the TREBLE +/- buttons to increase or
decrease the treble.
(treble+5 / treble–5)
• Press the BASS +/- buttons to increase or
decrease the bass.
(bass+5 / bass–5)
Turn the Surround Sound ON/OFF
• Press the SURR button on the remote control
to turn on the surround sound. Press this
button again to turn o the surround sound.
Adjust the Volume
• Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
• If you wish to turn the sound o, press the
(MUTE) button on the remote control. Press
the (MUTE) button again or press the VOL+
/ VOL- buttons to resume normal listening.
Adjust the Brightness
• Press the DIMMER +/- button on the remote
control to select brightness level.
Select a Preset Sound Eect
• While playing, press the EQ button on the
remote control to select desired preset
equalizers:
MUSIC, MOVIE, NEWS, SPORT, NIGHT, GAME,
HI-RES, AI EQ
Set the Audio Delay
Video image processing, sometimes longer than
the time required to process the audio signal. This
is called “delayed.” Audio Delay feature is designed
to remedy this delay. By default, the audio delay is
set to 0.
- Set the audio delay, provided only for the
current playback mode. (As provided in the
HDMI ARC audio delay mode, the delay mode
is valid only for the HDMI ARC).
1. Ensure the sound bar is in Power-ON state.
2. Pointing the remote at the soundbar, press and
hold the button to open the menu. Press
the button 9 times in succession, the display
shows: [LATENCY 00]

Hisense HS216F Specifications

General

Brand	Hisense
Model	HS216F
Category	Speaker System
Language	English