Hisense HS216F User Manual

8
Remote Control
1 Switch the unit between ON and
STANDBY mode.
2 (SOURCE) Select the play function.
3 SURR Adjust the surround ON/OFF.
4 (BT) Select the Bluetooth mode.
Press the (BT) button to disconnect the
current Bluetooth connection or re-enter
the pairing state.
5 EQ Select a preset sound eect.
6 / Skip to previous/next track in BT/USB mode.
7 VOL+/VOL- Increase/decrease the volume level.
8 Press and hold the button of the remote
control for 3s to enter the MENU, the Main
Unit displays “MENU”.
9 BASS+/- Adjust bass level.
10 TREBLE+/- Adjust treble level.
11 DIMMER+/- Adjust display brightness.
12 (MUTE) Mute or resume the sound.
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
•
Even if the Remote Control is operated within
the effective range 19.7 feet (6m), remote
control operation may be impossible if there
are any obstacles between the unit and the
remote control.
•
If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate
incorrectly. Conversely, the other products may
operate incorrectly.
Precautions Concerning Batteries
• Be sure to insert the batteries with correct
positive “

” and negative “

” polarities.
• Use batteries of the same type. Never use
dierent types of batteries together.
• Either rechargeable or non-rechargeable
batteries can be used. Refer to the precautions
on their labels.
• Be aware of your fingernails when removing
the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote
control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet
object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time,
as corrosion or battery leakage may occur
and result in physical injury, and/or property
damage, and/or re.
• Do not use any batteries other than those
specied.
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is conrmed
to be a rechargeable type.
Replace the Remote Control Battery
1 Press and slide the back
cover to open the battery
compartment of the remote
control.
2 Insert two AAA size batteries
(included). Make sure the (+)
and (–) ends of the batteries
match the (+) and (–) ends
indicated in the battery
compartment.
3 Close the battery
compartment cover.
Preparations

Hisense HS216F Specifications

General

Brand	Hisense
Model	HS216F
Category	Speaker System
Language	English