Hisense HS216F User Manual

15
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
• The player will also be disconnected when
your device is moved beyond the operational
range.
• If you want to reconnect your device to this
player, place it within the operational range.
• If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
• If the connection is lost, follow the instructions
above to pair your device to the player again.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports
Advanced Audio Distribution Prole (A2DP),
you can listen to the music stored on the
device through the player.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if
it supports AVRCP).
- To pause/resume play, press the button on
the remote control.
- To skip to a track, press the / buttons
on the remote control.
USB Operation
1 Insert the USB device.
2 Press the button repeatedly on the unit or
on the remote control to select USB mode.
3 During playback:
- To pause or resume play, press the button on
the remote control.
- To skip to the previous/next le, press the
/ buttons on the remote control.
Tips:
• The unit can support USB devices with up to
32 GB of memory.
• This unit can play WAV/WMA/MP3/FLAC/DSD/
ALAC.
• Support a USB port: exFAT/FAT16/FAT32.
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
• Ensure that the AC cord of the apparatus is
properly connected .
• Ensure that there is power at the AC outlet.
• Press standby button to turn the unit on.
Remote control does not work
• Before you press any playback control button,
rst select the correct source.
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-)
aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor
on the front of the unit.
No sound
• Make sure that the unit is not muted. Press
MUTE or VOL+/VOL– button to resume normal
listening.
• Press button on the unit or on the remote
control to switch the soundbar to standby
mode. Then press the button again to switch
the soundbar on.
• Ensure the audio setting of the input source
(e.g. TV, game console, DVD player, etc.)
is set to PCM or Dolby Digital mode while
using digital (e.g. HDMI, OPTICAL, COAXIAL)
connection.
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
device is not muted.

Hisense HS216F Specifications

General

Brand	Hisense
Model	HS216F
Category	Speaker System
Language	English