16
Basic Features
3D - Enables playback of 3D movies and TV shows (requires
compatible 3D glasses).
3D Mode: Format may be set to: Off, 2D-to-3D, Side-by-
Side or Top-and-Bottom.
L-R Switch: Flips the left and right frames in Side-by-
Side format.
Depth of Field: Adjusts the range of distance (focus) that
appears acceptably sharp in a 3D image.
3D-to-2D: Disables automatic identification of 3D format
during playback; forces 2D playback using only the Left
or Right frame.
Picture
Select Back
3D Mode.
3D Mode
L-R Switch
Depth of Field
3D-to-2D
Side-by-Side
LR
O
16
NOTE
When 3D signal format is Frame Packing, the image
will be displayed according to the resolution of the
incoming signal.
For example: when the input signal is 1280×720, a
720p image will be displayed. A 1920×1080 input
signal will be displayed in 1080p.
When 3D signal format is Side-by-Side, Top-and-
Bottom, the image is displayed full screen in half
resolution (960× 1080 or 1920×540 respectively).
Using the Audio Menu
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Speech,
User or Music.
Balance - Adjust the volume of the left and right speakers.
Equalizer - Soften or enhance the sound at specific
frequency points.
Sound Surround - Simulates surround sound and enhances
bass response.
Digital Audio Output - Send digital audio to an external
audio system. You can select PCM, RAW or Off.
PCM: PCM outputs two channel audio regardless of the
input format.
RAW: Passes through (output = input) the incoming audio
signal without decoding. E.g. incoming Dolby Digital, DTS
or PCM data stream is simply output as it is without any
processing.
Auto Volume Control - Automatically adjusts volume to a
consistent level; attenuates loud passages.
Audio
Select Back
Standard
O
PCM
O
0
Select a Sound mode
to achieve ideal sound.
Sound Mode
Balance
Equalizer
Sound Surround
Digital Audio Output
Auto Volume Control
Audio
Adjust Select Back
10DB
0DB
-10DB
0
120Hz
0
500Hz
0
1.5KHz
0
5KHz
0
10KHz
To Next Page
Loading...
Need help?
General
