9
English
SPECIFICATIONS
Item Model C 10FC2
Motor Type Series commutator motor
Power source Single-phase AC 60Hz
Voltage (Volts) 115
Full-load current (Amp) 15
Applicable Outside Dia. 10" (255 mm)
saw blade Hole Dia. 5/8" (15.9 mm)
No load speed 4900rpm
Miter 0°
Max. Height 2-5/8" (67 mm) *Max. Height 3-1/2" (89 mm)
Bevel 0°
Max. Width 5-3/4" (146 mm)
(
*Max. Width 3-5/8" (92 mm)
)
Miter 45°
Max. Height 2-3/4" (70 mm)
Max. sawing
Max. Width 3-1/2" (89 mm)
dimensions
Miter 0°
Max. Height 1-3/4" (44 mm)
Bevel 45°
Max. Width 5-1/8" (130 mm)
Miter 45°
Max. Height 1-3/4" (44 mm)
Max. Width 3-1/2" (89 mm)
Miter sawing range Left 0° – 45°, Right 0° – 60°
Bevel sawing range Left 0° – 45°
Net weight 32 lbs. (14.5 kg)
Cord 2 Conductor type cabtire cable 7.8 ft (2.4 m)
*Note: 11/16" (17 mm) thick spacer board is required to be attached to the fence.
ACCESSORIES
WARNING:Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury or
mechanical damage.
STANDARD ACCESSORIES
Fig. 3
e Vise Assembly (1 piece)
For how to use, refer to
page 16.
r Wrench (1 piece)
q 10" (255 mm) TCT Saw
blade (1 piece)
w Dust Bag (1 piece)
For how to use, refer to
page 19.
(No. of teeth 24 Code No.
311128)
To Next Page
Loading...
Need help?
General
