Hitachi n3804ab3 User Manual

1 Eye protection ..........................................................1
2 Nose cap (mounted on tool) .....................................2
3 Case .........................................................................1
SPECIFICATIONS
Operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
2
)
Dimensions
Length × Height × Width
10-11/32” × 9-1/4” × 2-3/8”
(263 mm × 235 mm × 60 mm)
Weight 2.3 lbs. (1.0 kg)
Magazine capacity 100 Staples
Air consumption
.025 ft
3
/cycle at 100 psi
(.73 ltr/cycle at 6.9 bar)
(.73 ltr/cycle at 7 kgf/cm
2
)
STAPLE SELECTION
WARNING
● Be sure to use only the genuine HITACHI staples for the N3804AB3 (S). The use of any other staples can
result in tool malfunction and/or staple breakdown, leading to serious injuries.
Only staples shown in the Table below can be driven with this Stapler.
Dimensions of staples
F inish staples 18 gauge 18 Gauge 1/4” Crown
Min. Max.
.043”
(1.08mm)
.049” (1.25mm)
.138”
(3.5mm)
1/2” (13mm)
1-1/2” (38mm)
ACCESSORIES
WARNING
● Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1
3
2
10
English
000BookN3804AB3(S)US.indb10000BookN3804AB3(S)US.indb10 2015/12/2516:49:542015/12/2516:49:54

Hitachi n3804ab3 Specifications

General

Brand	Hitachi
Model	n3804ab3
Category	Power Tool
Language	English