Hitachi RAS-2.5WHVRP User Manual

ENGLISH
7.8.2.2 Timer and schedule conguration
? NOTE
Timer settings are only valid if the corresponding zone is in ON state at the time of execution of the respective timer program.
The LCD controller must be set to the correct date and time before using the timer function.
Select the desired area to apply the timer function or delete all timers conguration:
Heating/Cooling (Air): To set the timer to
adjust the room temperature. Only when
using room thermostats.
Heating/Cooling (Water): To set the timer
to adjust the water working conditions.
The timer function allows the selection of simple and scheduled timers, as shown in the gures below:

Setting of Simple timer
Setting of temperature or operation mode (ECO or Comfort) to be applied during operation for a dened period, after which
operation returns to the previous settings. This type of timer cannot be used to modify the operation state from ON to OFF, which
can be accomplished with a Schedule timer.
Starting time:
Use the arrow keys to select the
starting time of the timer
Stopping time:
Use the arrow keys to select the stopping
time of the timer
Conguration parameters:
Congure the temperature for the Eco or
Comfort Mode.
Only available for Air settings (Circuit 1 or 2).
Timer type: Selection of the timer type
• Disable
• Simple timer
• Schedule
Frequency: Selection of the
timer frequency
• Never
• Once
• Everyday
• Weekend
• Work day
Mode: Selection of the working mode
• Eco
• Comfort
• Setting temperature: when this option
is selected is possible to congure the
temperature using the arrow keys. (Only
when OTC is Fix)
1 / 2
2 / 2
UNIT CONTROLLER
PMML0510 rev.1 - 10/2019
93

Hitachi RAS-2.5WHVRP Specifications

General

Brand	Hitachi
Model	RAS-2.5WHVRP
Category	Heat Pump
Language	English