8.2.2 Icons for the comprehensive view
Icon Name Explanation
Pump
This icon informs about pump operation.
There are three available pumps on the system. Each one is numbered, and its corresponding number is
displayed below to the pump icon when it is operating
Heater step Indicates which of the 3 possible heater steps is applied on space heating
DHW Heater Informs about DHW Heater operation. (If it is enabled)
Solar Combination with solar energy
Boiler Auxiliary boiler is working
Tariff Tariff signal informs about some cost conditions of the consumption of the system
Local / Full
- No icon means local mode
Full mode
Forced OFF
When forced off Input is congured and its signal is received, all the congured items on the comprehensive
view (C1, C2, DHW, and/or SWP) are shown in OFF, with this small icon below
Auto ON/OFF
When daily average is over auto summer switch-off temperature, circuits 1 and 2 are forced to OFF (Only if
Auto ON/OFF enabled)
Anti-Legionella Activation of the Anti-Legionella operation
DHW boost It activates the DHW heater for an immediate DHW operation
ECO mode
- No icon means Comfort mode
ECO/Comfort mode for circuits 1 and 2
YUTAKI CASCADE CONTROLLER
PMML0510 rev.1 - 10/2019
114
To Next Page
Loading...
Need help?
General