SAFETY
SA-26
EVACUATING IN CASE OF FIRE
• If a fire breaks out, evacuate the machine in the fol-
lowing way:
• Stop the engine by turning the key switch to the
OFF position if there is time.
• Use a fire extinguisher if there is time.
• Exit the machine.
518-E01A-0393
SA-393
BEWARE OF EXHAUST FUMES
• Prevent asphyxiation. Engine exhaust fumes can
cause sickness or death.
• If you must operate in a building, be sure there is
adequate ventilation. Either use an exhaust pipe
extension to remove the exhaust fumes or open
doors and windows to bring enough outside air
into the area.
509-E01A-0016
SA-016
PRECAUTIONS FOR WELDING AND
GRINDING
• Welding may generate gas and/or small fires.
• Be sure to perform welding in a well ventilated
and prepared area. Store flammable objects in a
safe place before starting welding.
• Only qualified personnel should perform welding.
Never allow an unqualified person to perform
welding.
• Grinding on the machine may create fire hazards.
Store flammable objects in a safe place before
starting grinding.
• After finishing welding and grinding, recheck that
there are no abnormalities such as the area sur-
rounding the welded area still smoldering.
523-E01A-0818
SA-818
To Next Page
Loading...
Need help?
General
