Hitron HT-EMN2 User Manual

2.4G WIRELESS SETTINGS
Version 1.0, 04/2015. Copyright 2012 Hitron Technologies
29
Version 1.0, 04/2015. Copyright 2015 Hitron Technologies
29
Hitron HT-EMN2 User’s Guide
Network Name
(SSID0)
(Multiple SSID)
Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
 Select Hidden to hide the 2.4GHz SSID.
 Select Enable to turn the 2.4GHz Multiple SSID on.
It is suggested that you change the SSID from its
default, for security reasons.
BSSID This field displays the Basic Service Set IDentifier of the
target wireless network. This is usually the Media Access
Control (MAC) address of the target network device.
Channel This displays the radio frequency (RF) channel on which
the HT-EMN2 is transmitting and receiving over the
wireless network.
The channel number displays, followed by the channel’s
frequency in MHz.
Figure 7: Channel (Frequency) Options
Channel Bandwidth Use this to select the available bandwidth.
WMM(QoS) Use this to select whether WiFi MultiMedia (WMM)
Quality of Service (QoS) settings are Enabled or
Disabled on this SSID.
Apply Click this to save your changes to the fields in this screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Table 6: The 2.4G Wireless Settings: Basic Screen (continued)

Hitron HT-EMN2 Specifications

General

Brand	Hitron
Model	HT-EMN2
Category	Extender
Language	English