Removing & Installing Body Components u Rear Seat
273
Rear Seat
#
Removal
1.
Insert the ignition key into the seat lock.
2.
Turn the ignition key clockwise, then push
the rear seat forward and up.
#
Installation
1.
Insert the tabs into the recesses.
2.
Push down on the front of the rear seat
until it locks in place.
u Make sure that the seat is locked
securely in position by pulling it up
lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.
Recesses
Tabs
Recesses
Tabs
Ignition key
Seat lock
Rear seat
To Next Page
Loading...
Need help?
General
