313
If the “–” Indicator is Blinking in the Gear Position Window While Riding
If the “–” indicator is blinking while riding, you
may have a serious problem with the Dual
Clutch Transmission system.
Park your vehicle in a safe place and have your
vehicle inspected by a dealer immediately.
It may be possible to ride your vehicle by
following the steps below.
1.
Turn the ignition switch to the OFF
position.
2.
Turn the ignition switch to the ON position
and start the engine.
Turn the ignition switch to the OFF position
and move the vehicle back and forth slightly
(to disengage the gears).
Turn the ignition switch to the ON position
again and start the engine.
Start the engine while applying the brake lever
or pressing the brake pedal.
When a gear position is shown in the gear
position indicator, you can ride in that gear.
Take your vehicle to your dealer riding at a
safe speed.
Damage is preventing you from riding. Have
your vehicle inspected by your dealer
immediately.
If you cannot start the engine:
If you still cannot start the engine:
If you can shift from N to D mode:
If you can't shift from N to D mode and the “–”
indicator is blinking:
To Next Page
Loading...
Need help?
General
