Other Adjustments u Adjusting the Rear Suspension
299
Continued
Adjusting the Rear Suspension
#
Spring Preload
You can adjust the spring preload by the
adjuster knob to suit the load or the road
surface. The spring preload adjuster has 35
position or more. Turn the clockwise to increase
spring preload (high), or turn counterclockwise
to decrease spring preload (low).
Turn the adjuster counterclockwise (low) until
it will no longer turn (lightly seat). Turn the
adjuster clockwise (high) until it clicks. This
click is position 0.
The standard position is 7 clicks from the
minimum setting.
Do not turn the adjuster beyond its limits.
The rear shock absorber damper unit contains high
pressure nitrogen gas. Do not attempt to disassemble,
service, or improperly dispose of the damper. See your
dealer.
To Next Page
Loading...
Need help?
General
