Honda cb400 super four User Manual

Refer to the Safety Precautions on page .
This motorcycle is equipped with a side
stand only. Therefore, if front or rear wheel
removal is required, it will be necessary to
raise the center of the motorcycle with a
jack or other firm support. If none is
available, see your Honda dealer for this
service.
To avoid damage to the brake hose, support
the caliper assembly so that it doesn’t hang
from the hose. Do not twist the brake hose.
Raise the front wheel off the ground by
placing a support block under the engine.
Remove the right and left caliper
assemblies ( ) from the fork leg by
removing the fixing bolts ( ).
2.
1.
(2)
(1)
2
1
82
(1) Brake caliper assembly
(2) Fixing bolts
WHEEL REMOVAL
Front Wheel Removal
106
05/03/25 12:09:09 32MCE610_116

Honda cb400 super four Specifications

General

Displacement	399 cc
Bore x Stroke	55.0 x 42.0 mm
Compression Ratio	11.3:1
Fuel System	PGM-FI electronic fuel injection
Transmission	6-speed
Front Suspension	Telescopic fork
Fuel Tank Capacity	18 liters
Seat Height	755 mm
Final Drive	Chain
Front Tire	120/60 ZR17
Rear Tire	160/60 ZR17
Width	725 mm
Wheelbase	1, 410 mm
Ground Clearance	130 mm
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-cylinder
Max Power	53 hp (39 kW) @ 11, 000 rpm
Max Torque	39 Nm @ 9, 500 rpm
Rear Suspension	Twin shock
Front Brake	Disc brake
Rear Brake	Disc brake
Ignition	Digital transistorized