Honda cb400 super four User Manual

Make sure the engine is off before you
begin any maintenance or repairs. This
will help eliminate several potential
hazards:
Be sure there is adequate ventilation
whenever you operate the engine.
Let the engine and exhaust system cool
before touching.
Do not run the engine unless instructed
to do so.
Read the instructions before you begin,
and make sure you have the tools and
skills required.
To reduce the possibility of a fire or
explosion, be careful when working
around petrol or batteries. Use only
nonflammable solvent, not petrol, to clean
parts. Keep cigarettes, sparks and flames
away from the battery and all fuel-related
parts.
Remember that your Honda dealer knows
your motorcycle best and is fully equipped
to maintain and repair it.
To ensure the best quality and reliability,
use only new genuine Honda parts or their
equivalents for repair and replacement.
To help prevent the motorcycle from
falling over, park it on a firm, level
surface, using the side stand or a
maintenance stand to provide support.
SAFETY PRECAUTIONS
Carbon monoxide poisoning f rom
engine exhaust.
Burns from hot parts.
Injury from moving parts.
82
05/03/25 12:06:22 32MCE610_092

Honda cb400 super four Specifications

General

Displacement	399 cc
Bore x Stroke	55.0 x 42.0 mm
Compression Ratio	11.3:1
Fuel System	PGM-FI electronic fuel injection
Transmission	6-speed
Front Suspension	Telescopic fork
Fuel Tank Capacity	18 liters
Seat Height	755 mm
Final Drive	Chain
Front Tire	120/60 ZR17
Rear Tire	160/60 ZR17
Width	725 mm
Wheelbase	1, 410 mm
Ground Clearance	130 mm
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-cylinder
Max Power	53 hp (39 kW) @ 11, 000 rpm
Max Torque	39 Nm @ 9, 500 rpm
Rear Suspension	Twin shock
Front Brake	Disc brake
Rear Brake	Disc brake
Ignition	Digital transistorized