EasyManuals Logo

Honda CBR300R 2018 User Manual

Honda CBR300R 2018
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your motorcycle:
Tire tread wear and air pressures are within
limits. 2 P. 47
Lights, horn, and turn signals operate
normally.
Check the condition of the drive chain.
Adjust slack and lubricate as needed.
2 P. 44
Check the following items if you are carrying a
passenger or cargo:
Combined weight is within load limits.
2 P. 126
Cargo is secured properly.
Suspension is adjusted to suit load. 2 P. 83
Check the following items after you get on your
motorcycle:
Throttle action moves smoothly without
binding. 2 P. 80
Brake lever and pedal operate normally.
Check the fuel level and refuel when
needed. 2 P. 13, 2 P. 29
Engine stop switch functions properly.
2 P. 24
Check the following items at regular intervals:
Oil level is between the upper and lower
level marks. 2 P. 62
Brake fluid level is
Front: above the LWR level mark. 2 P. 69
Rear: between the UPPER and LOWER level
marks. 2 P. 69
Engine coolant level is between the UPPER
and LOWER level marks. 2 P. 67
Side stand functions properly. 2 P. 72
20170925135210_31K75A200_enu_BOOK Page 40 Monday, September 25 2017 13:58:25 JST
Maintenance
37

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CBR300R 2018 and is the answer not in the manual?

Honda CBR300R 2018 Specifications

General IconGeneral
Engine Type286cc liquid-cooled single-cylinder four-stroke
Bore and Stroke76mm x 63mm
Compression Ratio10.7:1
Valve TrainDOHC; four valves per cylinder
InductionPGM-FI, 38mm throttle body
IgnitionComputer-controlled digital transistorized with electronic advance
Horsepower30.4 HP @ 8, 500 RPM
TransmissionSix-speed
Final DriveChain
Front Suspension37mm fork; 4.65 inches travel
Rear SuspensionPro-Link single shock with five-position spring preload adjustability; 4.07 inches travel
Front BrakeSingle 296mm disc with two-piston caliper
Rear BrakeSingle 220mm disc
Front Tire110/70-17
Rear Tire140/70-17
Rake25.3°
Trail98mm (3.9 inches)
Wheelbase54.3 inches
Seat Height30.7 inches
Fuel Capacity3.4 gallons
MPG71 MPG
Fuel SystemPGM-FI
Curb Weight357 pounds

Related product manuals