Honda CBR300R 2018 User Manual

Throttle
Checking the Throttle
With the engine off, check that the throttle
rotates smoothly from fully closed to fully
open in all steering positions and throttle
freeplay is correct. If the throttle does not
move smoothly, close automatically, or if the
cable is damaged, have the motorcycle
inspected by your dealer.
Freeplay at the throttle grip flange:
1/16 - 1/4 in (2 - 6 mm)
Adjusting the Throttle Freeplay
1. Slide the cable boot.
2. Loosen the lock nut.
3. Turn the adjuster until the freeplay is 1/16
- 1/4 in (2 - 6 mm).
4. Tighten the lock nut, return the cable
boot, and inspect the throttle action
again.
20170925135210_31K75A200_enu_BOOK Page 83 Monday, September 25 2017 13:58:25 JST
Maintenance
80
Freeplay
Flange
Throttle grip
Lock nut
Adjuster
Cable boot
–
+

Honda CBR300R 2018 Specifications

General

Engine Type	286cc liquid-cooled single-cylinder four-stroke
Bore and Stroke	76mm x 63mm
Compression Ratio	10.7:1
Valve Train	DOHC; four valves per cylinder
Induction	PGM-FI, 38mm throttle body
Ignition	Computer-controlled digital transistorized with electronic advance
Horsepower	30.4 HP @ 8, 500 RPM
Transmission	Six-speed
Final Drive	Chain
Front Suspension	37mm fork; 4.65 inches travel
Rear Suspension	Pro-Link single shock with five-position spring preload adjustability; 4.07 inches travel
Front Brake	Single 296mm disc with two-piston caliper
Rear Brake	Single 220mm disc
Front Tire	110/70-17
Rear Tire	140/70-17
Rake	25.3°
Trail	98mm (3.9 inches)
Wheelbase	54.3 inches
Seat Height	30.7 inches
Fuel Capacity	3.4 gallons
MPG	71 MPG
Fuel System	PGM-FI
Curb Weight	357 pounds