153
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button
Continued
ENGINE START/STOP Button
*1: Canadian models
■
Changing the Power Mode
Models with smart entry system
1ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
You can start the engine when the smart entry
remote is inside the vehicle.
The engine may also run if the smart entry remote is
close to the door or window, even if it is outside the
vehicle.
ON mode:
The ENGINE START/STOP button is on (in red), if the
engine is running.
If the battery of the smart entry remote is getting
low, the engine may not start when you push the
ENGINE START/STOP button. If the engine does not
start, refer to the following link.
2 If the Smart Entry Remote Battery is Weak
P. 581
Do not leave the power mode in ACCESSORY or ON
when you get out.
VEHICLE OFF (LOCK)
The button is off.
The steering wheel is locked
*1
.
The power to all electrical components is turned off.
Press the button without the
transmission in
(P.
Press the button with the
transmission in
(P.
Press the button.
Without pressing the brake pedal
ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories in this
position.
ON
The button blinks (in red).
All electrical components can be used.
Put the transmission into
(P.
21 CIVIC 4D HCM_HMIN_J (KA KL KC)-31TBA6500.book 153 ページ ２０２０年８月２５日 火曜日 午後２時６分
To Next Page
Loading...
Need help?
General
