than what was intended. It also assists in maintaining traction on slippery surfaces.
engine does not respond to the accelerator.
hydraulic brake system. You will also see the
indicator blink.
1Vehicle Stability Assist
TM
(VSA®), aka Electronic Stability Control
(ESC), System
VSA® may not function properly if tire types and sizes
are mixed. Make sure to use the same size and type
of tire, and the air pressures are as specified.
When the VSA® system indicator comes on and stays
on while driving, there may be a problem with the
system. While this may not interfere with normal
driving, have your vehicle checked by a dealer
immediately.
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow, Road Departure Mitigation
(RDM), Vehicle Stability Assist
TM
(VSA®) system, Vehicle
Stability Assist
TM
(VSA®) OFF, Low Tire Pressure/TPMS
*
and Collision Mitigation Braking System
TM
(CMBS
TM
)
may come on after reconnecting the battery. Drive a
short distance at more than 12 mph (20 km/h). The
indicators should go off. If they do not, have your
vehicle checked by a dealer.
VSA® cannot enhance stability in all driving situations
and does not control the entire braking system. You
still need to drive and corner at speeds appropriate
for the conditions and always leave a sufficient
margin of safety.
The main function of the VSA® system is generally
known as Electronic Stability Control (ESC). The
system also includes a traction control function.
To Next Page
Loading...
Need help?
General
