598
uuFusesu
Inspecting and Changing Fuses
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK (0
*1
. Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
1Inspecting and Changing Fuses
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2 Fuse Locations P. 595
Replace fuse with a spare fuse of the same specified
amperage.
There is a fuse puller on the back of the engine
compartment fuse box cover.
21 CIVIC 4D HCM_HMIN_J (KA KL KC)-31TBA6500.book 598 ページ ２０２０年８月２５日 火曜日 午後２時６分
To Next Page
Loading...
Need help?
General
