25
Continued
Display Mode Settings
Turning Off the Display
Press the (Display mode) button for more than two seconds.
u Press the HOME button, BACK button, or (Display mode) button to turn
on the display.
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
(Display mode) button to cycle through the display modes (Day to Night to Off).
Press the (Display mode)
button.
u The Brightness bar is displayed for
a few seconds.
u Select or to adjust the
brightness.
1 Switching Display Mode Manually
The display brightness can be changed from the
System settings screen as well.
2 Display P. 65
You can also adjust the display brightness by sliding
or flicking on the bar.
The map color is also switched depending on the Day
and Night mode. The map color can be set on the
Navigation settings screen.
2 Color P. 53
Illumination
control
Priority Operation
button 1 Selects Day or Night display mode when the user
wants to change the brightness of the display
temporarily.
Remember:This button overrides all other display
brightness adjustment that is set by the sunlight sensor
automatically or you changed manually from the
System settings screen.
15 CR-V NAVI-31T0A8100.book 25 ページ ２０１４年８月７日 木曜日 午前１０時５０分
To Next Page
Loading...
Need help?
General
