OPERATION
37
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch to the OFF
position. Under normal conditions, use the following procedure.
1. Turn off or disconnect all appliances that are connected to the generator or
the parallel operation kit.
2. Turn the engine switch to the OFF position.
3. Turn the fuel valve lever to the OFF position.
4. If two generators were connected for parallel operation, disconnect the
parallel operation kit/receptacle assembly after stopping the engines if you
do not wish to resume parallel operation.
31ZS96101.book 37 ページ ２０２０年２月２６日 水曜日 午後２時３３分
To Next Page
Loading...
Need help?
General
