SERVICING YOUR GENERATOR
55
SPARK ARRESTER SERVICE
The spark arrester must be serviced every 100 hours to keep it functioning as
designed.
If the engine has been running, the muffler will be very hot. Allow the muffler to
cool before servicing the spark arrester.
Clean the spark arrester as follows:
1. Remove the four 6 mm cap nuts, and remove the rear cover.
2. Remove the four 6 mm bolts, and remove the upper muffler protector.
3. Remove the four 8 mm bolts, and remove the rear handle.
4. Remove the four 6 mm bolts, and remove the rear under plate.
6 mm CAP NUTS
UPPER MUFFLER
PROTECTOR
REAR COVER
6 mm BOLTS
31ZS96101.book 55 ページ 2020年2月26日 水曜日 午後2時33分