Honda umc435 User Manual

2
SAFETY INFORMATION
Operator Responsibility
• Understand the operation of all controls and learn how to stop the
engine quickly in case of an emergency. Make sure the operator
receives adequate instruction before operating the equipment.
• Do not allow children to operate the powerhead. Keep children and
pets away from the area of operation.
• Your powerhead’s exhaust contains poisonous carbon monoxide. Do
not run the engine without adequate ventilation, and never run the
engine indoors.
• The powerhead and exhaust become very hot during operation.
• Only use Honda approved attachments. If not, injury or accident may
occur.
• Read and follow the instructions in the owner’s manual that came with
each attachment.
• Never operate the powerhead when tired, ill, or under the influence of
alcohol or other drugs.
• Any part of the machine is a potential source of danger if the machine
is used in abnormal conditions or if the maintenance is not performed
correctly.
• If you lend or resell your powerhead to a third person, instruct him or
her on how to handle the product and alert him or her to read the
Owner’s Manual carefully before operation.
• Follow the instructions in the owner’s manual that comes with each
attachment.
• Keep in mind that the operator or user is responsible for any accidents
or hazards that may occur to other people or their property.
• While operating the powerhead, always wear protective clothing and
protective devices.
• Follow the instructions in the owner’s manual that comes with each
attachment, regarding required protective clothing and protective
devices. For example:
– Protective clothing
Wear adequate clothes with long sleeves and long pants.
Do not wear loose or baggy clothing.
Arm covers and leg protectors should be worn.
Do not wear anything around your neck (for example necklaces or
neckties).
Tie your hair if it is long.
– Protective devices
* Eye protection
Eye protection should meet the requirements of ANSI Z87.1.
Wear safety glasses or other eye protection to protect your eyes
from flying debris.
*Hard hat
Wear a hard hat to protect your head from any overhead branches
and falling foreign material.
* Face shield
Wear a face shield to protect your face from flying debris.
* Ear hearing protection
To reduce the risk of hearing loss, hearing protection is required.
*Gloves
Wear gloves to protect your hands.
* Safety boots
Wear safety boots with a non-slip sole and toe protector to protect
your feet from falling objects and flying debris.
Do not operate the equipment barefoot or wearing open sandals.
* Leg protectors
We recommend that you wear the leg protectors to protect your
legs.
* Dust mask
We recommend that you wear a dust mask to protect yourself
from dust and pollen.
• Before each use, visually inspect the powerhead for any damage and
looseness of parts.
• Before each use, look around and underneath the engine for signs of
oil or gasoline leaks.
• Avoid operating the powerhead at night, in poor visibility or in bad
weather.
• Walk, never run during operation.
• Avoid operating the powerhead on a steep slope.
The steep slope may be slippery, causing you to fall.
• Do not operate the powerhead with any labels, or any parts removed.
• Do not tamper with the powerhead as it can result in personal injury
and/or equipment damage.
• Only use attachments that are designed for your model and
application.
• Stop the engine by moving the engine switch to the OFF position in
the following cases:
– Before any operation around the powerhead.
– Before checking, cleaning or working on the powerhead.
– After dropping or striking a foreign object. Inspect the powerhead
for damage and make repairs before restarting the powerhead.
– If the powerhead starts to vibrate abnormally. Check immediately
the cause of the vibration and perform the necessary repair.
– Whenever you leave the powerhead unattended.
– Before refueling.
– When any person or pet is approaching.
– Shut off the engine immediately when the powerhead shows
abnormal vibration suddenly. Sudden vibration can suggest the
damaged rotating parts or loose fasteners. Examine the cause of the
problem, and do not start the engine before a repair is made.
• The attachment should not be moving when the engine is at idle. If this
happens, contact your authorized Honda dealer. This idle speed will
need to be adjusted. Make sure the cutting attachment has stopped
before the unit is set down.
• Keep all nuts, bolts and screws tight to be sure the powerhead is in a
safe working condition. Regular maintenance is essential to user’s
safety and product performance.
• Do not use the powerhead with worn or damaged parts. Parts must be
replaced, or repaired. Replace worn or damaged part
s with Honda
genuine parts. Non equivalent quality parts may damage the machine
and be prejudicial to your safety.
HARD HAT
EAR HEARING
PROTECTION
CLOTHES
(LONG SLEEVE)
CLOTHES (LONG PANTS)
LEG PROTECTORS
SAFETY BOOTS (WITH TOE
PROTECTOR)
GLOVES
FACE SHIELD
EYE PROTECTION
ARM COVERS
31VP86080.fm 2 ページ ２０２３年１０月５日 木曜日 午後２時２２分

Honda umc435 Specifications

General

Brand	Honda
Model	umc435
Category	Trimmer
Language	English