Honda Wave 110i User Manual

40
Maintenance
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you get on
your motorcycle:
● Throttle - Check for smooth opening and
full closing in all steering positions. 2 P. 58
● Engine oil level - Add engine oil if
necessary. Check for leaks.
2 P. 62
● Drive chain - Check condition and slack,
adjust and lubricate if necessary. 2 P. 65
● Brakes - Check operation;
Front: check brake fluid level
2 P. 70 and
pads wear. 2 P. 71
Rear: check shoes wear 2 P. 74 and
freeplay, adjust if necessary.
2 P. 72
● Wheels and tyres - Check condition, air
pressure and adjust if necessary. 2 P. 47
Pre-ride Inspection
12 AFS110-32KWWH00.book 40 ページ ２０１１年１０月２６日 水曜日 午後５時２２分
http://www.motorcycle.in.th

Honda Wave 110i Specifications

General

Displacement	109.5 cc
Bore x Stroke	50.0 mm x 55.6 mm
Compression Ratio	9.0:1
Fuel System	PGM-FI (Programmed Fuel Injection)
Transmission	4-speed
Starter	Electric and kick
Final Drive	Chain
Front Suspension	Telescopic fork
Rear Brake	Drum
Front Tire	70/90-17M/C 38P
Rear Tire	80/90-17M/C 50P
Ground Clearance	135 mm
Engine Type	4-stroke
Rear Suspension	Twin shock
Front Brake	Disc
Ignition System	Full Transistorized