Battery
❙
Removal
Make sure the ignition switch is off.
1.
Open the seat. 2 P. 33
2.
Remove the battery cover by removing the
screw.
3.
Disconnect the negative - terminal from
the battery.
4.
Disconnect the positive + terminal from
the battery.
5.
Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
+
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
“Maintenance Fundamentals.”
2 P. 42
Battery Goes Dead 2 P. 86
To Next Page
Loading...
Need help?
General