–34–
✻
81 Zone List Menu Mode
While in Program mode, press
✻
81 to enter Zone List Menu Mode.
This mode is used to program zone
lists for output devices (programmed in
✻
80 menu mode) or Chime-by-Zone in Zone List 3.
NOTES:
• Any list may include any or all of the systems zone numbers.
• A zone list can be assigned to more than one Powerline Carrier Device.
The prompts for *81 are as follows:
81 Zone List Programming ------------------- Main Menu prompt
A 01 Zone List Number --------------------------- for entering the zone list number to be programmed
b Zone Entry to List --------------------------- for entering zones to the assigned zone list
C Delete Entire List? -------------------------- for deleting the entire zone list and its contents
d Delete Specific Zones From List? ------- Selects whether to delete zones or return to next zone list number
E Delete Zones----------------------------------- for deleting specific zones from the current zone list
The following explains these prompts in detail. The left two columns identify the prompts and list the
available entries. The right-most column provides a further explanation of the entries.
1RWHV
(QWHULQJ D QXPEHU RWKHU WKDQ RQH VSHFLILHG ZLOO JLYH XQSUHGLFWDEOH UHVXOWV
'R QRW DVVLJQ ]RQHV ZLWK ]RQH W\SHV RU WR D ]RQH OLVW
-
Zone list programming
H[LW PRGH
HQWHU PRGH
Pressing 1 advances to the next prompt below.
Pressing 0 exits mode, upon which this prompt blinks, indicating
the mode is inactive.
% -
Zone list number
]RQH OLVW QXPEHU WR EH SURJUDPPHG
H[LW =RQH /LVW PRGH
>
✻
@ FRQWLQXH
Enter the Zone List Number 01, 02, or 03 to program (or 00 if no
zone lists are used).
E
]]
Zone entry to list
]RQH QXPEHUV WR DGG WR
]RQH OLVW
>
✻
@ DFFHSW ]RQH QXPEHU DQG HQWHU WKH QH[W
]RQH QXPEHU
DFFHSW ]RQH QXPEHUV DQG FRQWLQXH WR
QH[W SURPSW
Enter each zone number to add to the zone list by first entering
the zone number, then the [✻] key (for example, 01✻ 02✻ 03✻).
The system will announce the Voice Descriptor for the selected
zone, if it is programmed. After all desired zones are enrolled,
enter “00” to advance.
'
Delete entire zone list?
GRQ·W GHOHWH FRQWLQXH WR QH[W SURPSW
GHOHWH WKH FXUUHQW ]RQH OLVW
To delete the zone list, enter “1”. All zones in the zone list will be
deleted automatically and programming will return to the ZONE
LIST NUMBER prompt.
To save the zone list or delete specific zones from the list, enter
“0”.
G
Delete zones from list?
FRQWLQXH WR GHOHWH ]RQHV SURPSW
GRQ·W GHOHWH FRQWLQXH WR QH[W ]RQH OLVW
QXPEHU SURPSW $«
>@ UHWXUQ WR ]RQH OLVW QXPEHU SURPSW
$«
To save the entire zone list, enter “0” and programming will
return to the ZONE LIST NUMBER prompt.
To delete a zone or zones in a zone list enter “1”.
)
Delete zones
(QWHU HDFK GLJLW ]RQH QXPEHU WR EH GHOHWHG
IURP WKH FXUUHQW ]RQH OLVW IROORZHG E\ WKH >
✻
@
NH\
>
✻
@ GHOHWH ]RQH DQG HQWHU QH[W ]RQH WR EH
GHOHWHG
GHOHWH ]RQH DQG UHWXUQ WR QH[W ]RQH OLVW
QXPEHU SURPSW $« GHVLUHG
When deleting a zone(s) from the zone list, if the selected zone
has a Voice Descriptor programmed, upon deletion it will be
announced as a confirmation that it has been deleted. After all
zones to be deleted are entered, enter “00” to return to the ZONE
LIST NUMBER prompt so that another list can be programmed,
if desired.
To Next Page
Loading...
Need help?
General
