4
1. Equipment description
POL200TS is a device with a colour touch screen display. It is used for the preliminary check
of the loop device installation compatible with Notifier control units.
POL200TS can recognize all the loop devices with CLIP/ADVANCED protocols from Notifier,
with additional multimeter and oscilloscope functions. POL200TS makes the initial wiring
test quick and easy. It also allows exporting a file to the PK8200 software, which contains all
the information on the types of devices detected.
Its use is extremely simple, thanks to a user-friendly interface and to the one-touch functions:
it can even be used while wearing gloves.
The mapping function, using the loop isolators, allows the loop cabling topology to be checked.
The screen can be used to read the manufacturing date and detailed information about the
sensors, inputs and outputs or to identify the equipment status or even to detect internal
equipment faults.
The log function generates a file with the status and data of each loop device. It allows an
accurate control of the system operation by checking the loop devices to anticipate and record
equipment maintenance tasks in critical situations.
The saved files can be easily downloaded via USB, without the need of special software. This
makes it possible to retrieve and send the saved files for reviewing, checking and configuring
the system.
The device and the log file include the serial number and the date of manufacture (month/
year) of each device. The multimeter allows validating the wiring and identifying any connection
problems. The oscilloscope function is very useful for identifying any electrical noise.
The six internal, 2500mA NiMH, rechargeable batteries provide the installer with sufficient
capacity, up to 6 hours depending on the loop load.
Please note that POL200TS is a device designed to help you check the quality of the
line and signal in your installation. POL200TS is not a fire protection equipment, it
only provides qualified technicians with the necessary supporting information for the
identification and solution of faults.
POL200TS is designed to be used only by trained personnel who can interpret the
instructions given.
To Next Page
Loading...
Need help?
General