11
Schedule Override
Temporary Override
Set until next programmed setpoint is reached.
1. Press
or to set the new desired temperature. The programmed
schedule will resume at the next programmed setpoint.
During normal use your Thermostat will follow the programmed schedule - indicated by
the
icon. There are a few ways you can override the schedule to suit your current needs.
2 H
Timed Override (1 or 2 hours)
Can be used to Boost (increase) the heating for a short period or as an
Economy (decreased) setting if leaving the house for a short period.
1. Press
or to set the new desired temperature and press to activate the timer.
2. Press
or to select 1 or 2 Hours and press
3. To cancel the timed override press again from the home screen.
Turn Schedule Off (Manual Mode)
Turn the heating schedule off and permanently follow a single
(adjustable) temperature - until the schedule is turned on again.
1. Press
or to select the schedule menu and press
2. Press or to select OFF and press
3. Press or to adjust the permanent temperature.
4. Repeat above steps and choose ON to follow the schedule.
To Next Page
Loading...
Need help?
General
