15
Refit the separator making sure that
the tabs on the separator fits into the
grooves on the dirt cup. Then refit the
dirt cup cover.
Pull the tab on the filter to remove from
the separator.
Tap the filter against the bin to remove
any dirt and debris.
Wash the filter under running water
(40°C max). Leave for at least 24hrs or
until fully dry before replacing.
24hr
40°C
MAX
CLEANING THE FILTER
CAUTION: Ensure that the filter,
dirt cup lid and separator are
refitted before use.
IMPORTANT: Don’t over ll the dust cup to avoid blocking the air ow through the vacuum cleaner. Do not exceed
the MAX line indicated on the side of the dust cup.
CLEANING AND MAINTENANCE
IMPORTANT: The lter should be tapped over a bin every 4-6 uses, to remove dirt and debris, and replaced every
6-9 months, depending upon use. The lter should be washed every 3 months, or when required. Allow the lter to
completely dry before reinstalling.
To Next Page
Loading...
Need help?
General
