7. For Best Results, Hoover recommends rinsing the carpet with clean water only. This will remove residual
carpet cleaning solution from your carpets. To Rinse with clean water only, set the wash/ rinse dial to Rinse
and then repeat steps 5 and 6.
Tools and Accessories
How to Attach Hose
Read “Before You Begin Cleaning” instructions. Be sure to check Hoover Cleaning Guide and the cleaning code on
your upholstery. Use your cleaner only on upholstery marked “W” or “W/S”.
CAUTION
To reduce risk of injury from moving parts – Unplug before servicing
1. Attach hose to the unit by opening the Hose Connection Port on the nozzle. Insert hose end, aligning the
indicator with the unlock arrows.
2. Rotate clockwise to lock position.
To Next Page
Loading...
Need help?
General
