Hoover Power Scrub Elite User Manual

Pretreating:
For best results, pretreat stains with a Hoover spot treatment (see Hoover Cleaning Solution Guide) to help loosen
and remove even the most stubborn stains.
NOTE: To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water
spray.
NOTE: To avoid damage to wood floors underneath area rugs or carpet, place waterproof material (ex: plastic)
underneath them before cleaning.
Getting started with your Power Scrub Elite™
To fill the Clean Water/Solution Tank
1. Press down on top latch of clean water tank and pull to remove.
2. Twist off the clean water cap on the top of the clean water tank. Add warm water to fill line and replace cap. –
DO NOT BOIL OR MICROWAVE WATER (Do not fill with water above 140˚ F (60˚ C).
3. Twist off the solution cap on the top of the clean water tank and pour cleaning solution into tank. Replace cap.
4. Angle the Solution/Clean Water tank back on the base and click it into place.

Hoover Power Scrub Elite Specifications

General

Brand	Hoover
Model	Power Scrub Elite
Category	Vacuum Cleaner
Language	English