EasyManuals Logo

Hotpoint BZ 89E1 P User Manual

Hotpoint BZ 89E1 P
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
C.O.P.® (Programmed Optimal Cooking) system. The cooking cycle stops
automatically and the oven indicates when the dish is cooked. You may start
cooking whether the oven has been preheated or not. The cooking duration
can be customised according to personal taste by modifying the relevant
value-beforecookingbegins-by±5/20minutesdependingontheselected
programme.Thedurationcanhoweverbemodiedevenoncecookinghas
begun.Ifthevalueismodiedbeforetheprogrammebegins,itisstoredin
the memory and suggested again by the appliance when the programme is
next used. If the temperature inside the oven is higher than the suggested
value for the selected mode, the text “Hot” appears on the display and it will
notbepossibletobegincooking;waitfortheoventocool.
! When the cooking stage has been reached, the oven buzzer sounds.
! Do not open the oven door as this will disrupt the cooking time and
temperature.
BAKED CAKES mode
This function is ideal for cooking desserts which are made using natural yeast,
baking powder and desserts which contain no yeast. Place the dish in the
oven while it is still cold. The dish may also be placed in a preheated oven.
BREAD mode
Usethisfunctiontobakebread.Toobtainthebestresults,werecommend
that you carefully observe the instructions below:
• Followtherecipe;
• Donotexceedthemaximum weightofthedrippingpan;
• Remember to pour 50 g (0,5 dl) of cold water into the baking tray in
position 5.
• Thedoughmustbelefttoriseatroomtemperaturefor1–1½hours
(depending on the room temperature) or until the dough has doubled in
size.
Recipe for BREAD:
1 Dripping pan holding 1000 g Max, lower level
2 Dripping pans each holding 1000 g Max, medium and lower levels
Recipefor1000gofdough:600gour,360gwater,11gsalt,25gfreshyeast
(or 2 sachets of powder yeast)
Method:
• Mixtheourandsaltinalargebowl.
• Dilutetheyeastinlukewarmwater(approximately35degrees).
• Makeasmallwellinthemoundofour.
• Pourinthewaterandyeastmixture.
• Kneadthedoughbystretchingandfoldingitoveritselfwiththepalmof
your hand for 10 minutes until it has a uniform consistency and is not too
sticky.
• Formthedoughintoaballshape,placeitinalargebowlandcoveritwith
transparent plastic wrap to prevent the surface of the dough from drying
out.SelectthemanualLOWTEMPERATUREfunctionontheovenand
set the temperature to 40°C. Place the bowl inside and leave the dough
to rise for approximately 1 hour (the dough should double in volume).
• Cutthedoughintoequalsizedloaves.
• Placetheminthedrippingpan,onasheetofbakingpaper.
• Dusttheloaveswithour.
• Makeincisionsontheloaves.
• Placethefoodinsidetheovenwhileitisstillcold.
• Startthe
BREAD cooking mode.
• Oncebaked,leavetheloavesononeofthegrillracksuntiltheyhave
cooled completely.
Programming cooking
! A cooking mode must be selected before programming can take place.
Programming the cooking duration
1. Press the
icon until the icon and the numerical digits on the
displaybegintoash.
2. Turn the TIMER knob towards “ ” and “ ”toadjustthetimeasdesired;
keep the knob in position to scroll through the numbers more quickly and
make the setting process easier.
3. Once you have reached the desired duration, press the
icon again.
The DISPLAY will show the duration and set temperature alternately.
4. Press the
icon to begin cooking.
5.Whencookinghasnished,“END”appearsontheDISPLAYandabuzzer
sounds.
• Forexample:itis9:00a.m.andadurationof1hourand15minutesis
programmed. The programme will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end time can be scheduled.
! For the delayed programming to work properly, the clock should be set to
the correct time.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Press the
icon twice: the icon and the numerical digits on the
DISPLAYwillbegintoash.
3. Turn the TIMER knob towards “ ” and “ ” to adjust the cooking end
time value.
4. Once you have reached the desired end time, press the
icon again.
The DISPLAY will show the duration, the cooking end time and the set
temperature alternately.
5. Press the
icon to activate the programmed mode.
Programming has been set when the
and icons light up alternately.
The DISPLAY shows the cooking end time, the cooking duration and the set
temperature alternately.
6.Oncecookinghasnished,“END”appearsonthedisplayandabuzzer
sounds.
• Forexample:it is9:00 a.m.and atime of 1 hour and 15 minutes is
programmed, while the end time is set to 12:30. The programme will
start automatically at 11:15 a.m.
To cancel programming press the
icon.
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-assisted cooking. This is
because excessive direct heat can burn temperature sensitive foods.
! In the GRILL and FAN GRILLING cooking modes, particularly when using
the rotisserie spit, place the dripping pan in position 1 to collect cooking
residues(fatand/orgrease).
MULTILEVEL
• Usepositions2and4,placingthefoodwhichrequiresmoreheaton2.
• Placethedrippingpanonthebottomandtherackontop.
10
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hotpoint BZ 89E1 P and is the answer not in the manual?

Hotpoint BZ 89E1 P Specifications

General IconGeneral
BrandHotpoint
ModelBZ 89E1 P
CategoryOven
LanguageEnglish

Related product manuals