To Next Page

To Previous Page

To start HP PC Hardware Diagnostics UEFI:

1. Turn on or restart the computer, quickly press esc, and then press f2.

The BIOS searches three places for the HP PC Hardware Diagnostics (UEFI) tools in the

following order:

a. Connected USB drive

NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 72.

b. Hard drive

c. BIOS

2. Click the type of diagnostic test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostic test, press esc.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English

only.

1. Go to http://www.hp.com.

2. Click Support & Drivers, and then click the Drivers & Software tab.

3. Enter the product name in the text box, and then click Search.

4. Select your computer model, and then select your operating system.

5. In the Diagnostic section, click HP UEFI Support Environment.

– or –

Click Download, and then select Run.

72 Chapter 7 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)

HP 11 Maintenance And Service Guide

Other manuals for HP 11