EasyManuals Logo
Home>HP>Desktop>1105

HP 1105 User Manual

HP 1105
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-4 Computer Setup—Security
Option Description
Setup Password Allows you to set and enable a setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
Power-On Password Allows you to set and enable a power-on password. The power-on password prompt appears
after a power cycle or reboot. If the user does not enter the correct power-on password, the unit
will not boot.
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Allows you to enable/disable:
Lock Legacy Resources (determines whether or not Windows Device Manager is allowed to
change resource settings for serial and parallel ports).
Setup Browse Mode (appears if a setup password is set) (allows viewing, but not changing,
the F10 Setup Options without entering setup password). Default is enabled.
Password prompt on F9 & F12 (requires setup password to use these boot functions).
Default is enabled.
Network Server Mode. Default is disabled.
Smart Cover Allows you to:
Lock/unlock the Cover Lock.
Set the Cover Removal Sensor to Disable/Notify User/Setup Password.
NOTE: Notify User alerts the user that the sensor has detected that the cover has been
removed. Setup Password requires that the setup password be entered to boot the computer if
the sensor detects that the cover has been removed.
Device Security Allows you to set Device Available/Device Hidden (default is Device Available) for:
Embedded security device
System audio
USB controller (varies by model)
Network controller
NOTE: You must disable AMT before trying to hide the network controller.
Serial port
Parallel port
SATA ports (varies by model)
USB Security Allows you to set Enabled/Disabled (default is Enabled) for:
Front USB Ports
Rear USB Ports
Accessory USB Ports
Computer Setup (F10) Utilities 13

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 1105 and is the answer not in the manual?

HP 1105 Specifications

General IconGeneral
BrandHP
Model1105
CategoryDesktop
LanguageEnglish

Related product manuals