2. To remove the display bezel, ex the inside of the top edge (1), the left edge (2), the bottom edge (3),
and the right edge (4) of the display bezel until the bezel disengages from the display enclosure.
3. To remove the camera/microphone module:
a. Position the display assembly with the top edge toward you.
b. Pry up to disengage the camera/microphone module from the adhesive that secures it to the
display (1).
c. Disconnect the cable (2) from the module.
4. To remove the display panel:
30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
Need help?
General
