Power connector cable
Description Spare part number
Power connector cable 808155-021
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 32).
5. Remove the battery (see Battery on page 34).
6. Remove the display (see Display assembly on page 56).
To remove the power connector cable:
▲
Lift the power connector cable straight up and out of the computer.
Reverse this procedure to install the power connector cable.
64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
Need help?
General
