Speakers
Description Spare part number
Speakers (includes left and right speakers and cable) 929647-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 32).
5. Remove the battery (see Battery on page 34).
6. Remove the system board (see System board on page 51).
To remove the speakers:
1. Remove the Phillips PM2.0×5.0 screw (1) that secures the right speaker to the computer.
2. Remove the cable from its routing path along the bottom of the computer (2), and then remove the
speakers from the computer (3).
Reverse this procedure to install the speakers.
Component replacement procedures 55
To Next Page
Loading...
Need help?
General
