To Next Page

To Previous Page

eMMC drive

Description Spare part number

eMMC drive, 32-MB (includes bracket) 822381-001

Before removing the eMMC drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 30).

5. Remove the optical drive (see Optical drive on page 31), if installed.

6. Remove the bottom cover (see Bottom cover on page 34).

To remove the eMMC drive:

1. Disconnect the drive cable from the system board (1).

2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the eMMC drive to the computer.

3. Lift the drive from the computer (3).

Component replacement procedures 39

Questions and Answers:

Need help?

Do you have a question about the HP 240 G4 and is the answer not in the manual?

HP 240 G4 Specifications

General

Display	14-inch HD (1366 x 768)
Operating System	Windows 10 Home
Processor	Intel Core i3-5005U
RAM	4GB / 8GB DDR3L
Storage	500 GB HDD
Graphics	Intel HD Graphics
Battery	3-cell Li-ion
Networking	Wi-Fi 802.11b/g/n, Bluetooth 4.0
Ports	1 USB 3.0, 2 USB 2.0, 1 HDMI, 1 VGA, 1 RJ-45, 1 headphone/microphone combo