To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if HP Print Server configuration page does not print?
If the configuration page on your HP Print Server isn't printing, make sure the print server is connected to a power source and check the cable connection to the printer. You may also try pressing the Test button.
What to do if HP printer display error messages after connecting to Print Server?
If your printer displays error messages after connecting to the print server, disconnect the print server from the printer to see if the same error message appears.
How to check the protocol status on HP Jetdirect configuration page?
Check the STATUS line for your protocol on the Jetdirect configuration page.
General| Brand | HP |
|---|---|
| Model | 300X - JetDirect Print Server |
| Category | Print Server |
| Language | English |
Describes the purpose and functionality of HP Jetdirect print servers for network connectivity.
Lists the documentation and manuals shipped with HP Jetdirect print servers.
Explains how to obtain and apply electronic upgrades for HP Jetdirect print servers.
Details the HP Install Network Printer Wizard utility for printer discovery, setup, and installation on TCP/IP networks.
Describes the HP Jetdirect Printer Installer for UNIX, providing support for HP-UX and Solaris systems.
Explains HP Web Jetadmin, a printer installation and management application for intranets.
Details the Internet Printing Protocol (IPP) support for HP Jetdirect print servers.
Overview of the necessity of valid TCP/IP network configuration parameters for HP Jetdirect print servers.
Describes how to configure the print server using BOOTP and TFTP services on UNIX servers.
Explains the use of Dynamic Host Configuration Protocol (DHCP) for auto configuration of HP Jetdirect print servers.
Details the setup procedure for configuring the print server using Reverse Address Resolution Protocol (RARP) on UNIX/Linux.
Explains how to configure an HP Jetdirect print server with an IP address using ARP and ping commands.
Provides instructions on how to configure the print server using Telnet commands.
Describes how to set IP parameters on HP Jetdirect print servers that support the embedded web server.
Provides guidance on moving an HP Jetdirect print server to a new network and reconfiguring IP addresses.
Describes how to configure the HP Jetdirect print server for use with systems supporting LPD printing.
Explains Line Printer Daemon (LPD) as a protocol for line-printer spooling services on TCP/IP systems.
Lists the prerequisites for using LPD printing, including printer connection and system access.
Outlines the necessary steps to configure the HP Jetdirect print server for LPD printing.
Details how to configure print queues for BSD-based systems and HP-UX systems using SAM utility.
Explains the process of configuring Windows systems to use HP Jetdirect LPD services.
Introduces FTP printing as a way to send print files from a client system to an HP Jetdirect-connected printer.
Lists the requirements for FTP printing, including print server firmware and TCP/IP client system compliance.
Details how to use FTP printing, including FTP connections, control, and data connections.
Summarizes commands available to the user during an FTP printing session.
Provides a typical example of an FTP printing session with commands and output.
Describes how to diagnose and correct problems associated with the HP Jetdirect print server.
Explains how to reset HP Jetdirect print server parameters, such as IP address, to factory default values.
Provides a flowchart for assessing and troubleshooting printer and network problems.
Describes the Ethernet/802.3 configuration page for HP Jetdirect external print servers.
Describes messages, network statistics, and status that can be printed on a Jetdirect configuration page.
Details messages related to HP Jetdirect product information, including firmware and hardware addresses.
Lists general status and error messages for HP Jetdirect print servers across various network operating systems.
Provides descriptions of network statistics messages, such as packets received and transmit errors.
Details messages related to Novell NetWare configuration, including IPX/SPX status and node names.
Describes messages related to DLC/LLC status and server addresses.
Lists TCP/IP configuration messages, including TCP status, IP address, and subnet mask.
Details Apple EtherTalk status messages, including network numbers and printer names.
Provides descriptions of SNMP messages related to community name configuration.
Provides a basic understanding of TCP/IP, its role in network communication, and its components.
Explains the Internet Protocol (IP), its function in routing data packets, and IP addresses.
Describes the Transmission Control Protocol (TCP) for reliable, connection-oriented data delivery.
Details the User Datagram Protocol (UDP) for request/reply transactions without guaranteed delivery.
Explains IP addresses, their structure, network and host portions, and the importance of correct assignment.
Covers methods for configuring TCP/IP parameters like IP address, subnet mask, and default gateway.
Explains the concept of subnets for partitioning networks and the function of subnet masks.
Defines gateways as translators between systems and explains the role of the default gateway.
Introduces the embedded web server on HP Jetdirect print servers for configuration and management.
Lists the requirements for accessing the embedded web server, including compatible web browsers and software versions.
Provides steps on how to access and view the HP Jetdirect print server's main web page.
Highlights special features like scanning capabilities and links to HP Web Jetadmin and HP.com.
