34 hp photosmart 320 user’s manual
Adding, modifying, and removing
e-mail addresses
NOTE You will need an internet connection to complete this
procedure.
1 Turn on the camera, press the button, then select the
Email...
Email...Email...
Email... option and press OK
OKOK
OK. A message on the image
display appears asking you to connect the camera to your
computer.
2 Connect the camera to your computer (by using the USB
cable or an optional HP Camera Dock).
3 On the computer, click Retrieve from Camera
Retrieve from CameraRetrieve from Camera
Retrieve from Camera.
4 In the screen called Modify Share Menu
Modify Share MenuModify Share Menu
Modify Share Menu, verify that
Photo E-mail
Photo E-mailPhoto E-mail
Photo E-mail is visible above the Add...
Add...Add...
Add... button, then click the
Add...
Add...Add...
Add... button.
5 If you are using a Macintosh computer, skip to step 7. If you
are using a computer running Windows, you will be asked
to sign in to HP’s Passport program. HP Passport allows you
to use HP’s free e-mail service and other services that might
be available in the future. The first time you see this screen,
you will need to register as a new user. Follow the on-screen
instructions for doing that.
6 Once you have successfully registered, sign in to the HP
Passport program, and then the Photo E-mail Setup
Photo E-mail SetupPhoto E-mail Setup
Photo E-mail Setup screen
will appear. Here, you can enter an e-mail address and
specify how you want it to appear in the camera’s Share
ShareShare
Share
menu. You can also enter a subject and body text to go with
the e-mail that will be sent to that address. After completing
the form, click Next
NextNext
Next. In the confirmation screen that appears,
click Finish
FinishFinish
Finish.
To Next Page
Loading...
Need help?
General
